BeamPro SWIR Laser Beam Profiler

Beam Profiler for SWIR wavelength range of 400 - 1700 nm

Femto Easy BeamPro beam profilers are available with a wide range of SWIR InGaAs-based sensor for measurements of laser beams within 400 - 1700 nm.

400 – 1700 nm

InGaAs-based Beam Profiler for tunable laser beams, Raman, 3-photon-microscopy, telecom and more

Large area available

SWIR rectangle

InGaAs Beam Profiler

The optimum wavelength sensitivity in the IR range from 400 – 1700 nm is provided with Femto Easy’s BeamPro SWIR.


Ideal for SWIR laser characterization

Leverage the InGaAs-based sensors specifications to accurately measure laser beam in the SWIR range.

Other BeamPro models

Technical Specification

Femto Easy’s BeamPro comes with a user-friendly and powerful software at no additional costs. Compare the technical specifications and discover your favorite model with a SWIR sensor.

 VSWIR 3.2SWIR 5.4VSWIR 6.5SWIR 10.8SWIR 13.10SWIR 21.17
Sensor size (mm)

3.3 x 2.64.8 x 3.86.5 x 5.29.6 x 7.712.8 x 10.221.0 x 17.0
Sensor formatSSMLLL+
Spectral range (nm)400-1700900-1700400-1700900-1700900-1700900-1700
0.3 Mpx
0.08 Mpx
1.3 Mpx
0.3 Mpx
1.3 Mpx
0.3 Mpx
Pixel size (μm)
Shutter typeGlobalGlobalGlobalGlobalGlobalGlobal
Minimum beam diameter (Φ FWHM, μm)12575257550270
Maximum acquisition frame rate (fps)2240100012823060230
Exposure time min20 µs10 µs20 µs10 µs10 µs10 µs
Exposure time max 50 ms 50 ms 50 ms 50 ms 50 ms 50 ms
Dynamic (dB)566356636163
Price■ ■ ■ ■■ ■ ■ ■■ ■ ■ ■■ ■ ■ ■■ ■ ■ ■■ ■ ■ ■
Sensor typeInGaAs
Bit depth121412141414
PC InterfaceUSB 3.1
SynchronizationYes (with the Trigger option)
Dimensions (mm)31x37x2546x46x5731x37x2546x46x5758x58x7046x46x57
1 The minimum beam diameters are specified for a precision of measurement better than 1%. Smaller beam diameter can be measured but the error will progressively increase.

2 Depending on the type of calculation, frame rate may vary.

Optional Features

Windowless: Removal of the BeamPro sensor window to avoid potential interferences

Additional ND filters: The default BeamPro configuration includes one ND filter. Additional ones with different specifications can be ordered

High dynamic range (120 dB): Software mode to increase the dynamic of the BeamPro signal acquisition from 14 to 16 bits. Not compatible with pure single-shot measurement as 2 images are necessary to build one beam profile image

Trigger: Synchronization of the BeamPro detection to an external signal for accurate laser single pulse measurement

Beam profiler software STAR

  • Live extraction of beam properties, even with resolutions larger than 20 Mpx
  • Several parameters and methods supported (ISO calculation included)
  • Enhanced background & hot pixels treatment for optimum dynamic and signal-to-noise ratio
  • Client / Server interface, allowing remote control through network
  • Advanced logging and permanent access to the 10 previous acquisitions
  • Live comparison with up to 10 different reference measurements
  • 1-click installation, completely configurable, export assistant