The Femto Easy BeamPro takes advantage of our user-friendly software, and provides thorough analysis and statistics of your laser beam. The BeamPro software uses standard communication protocols. It is therefore easily integrable in most complex environments. Several BeamPro can be controlled from a remote screen through the network. The BeamPro One-Inch are special models with the largest available measurement area, able to measure beams as large as 25 mm in diameter.
- Compact design
- User-friendly and powerful software
- Large sensor size, up to 25 mm diameter
|Spectral range (nm)||375 - 1100|
|Sensor size (mm)|
|25 x 16.1||Φ25|
|Resolution||1920 x 1200||2048 x 2048|
|2.3 Mpx||4.2 Mpx|
|Pixel size (μm)||13.48||12.65|
|Minimum beam diameter (Φ FWHM, μm)||68||63|
|Maximum acquisition frame rate (fps)1||47||80|
|Exposure time||min (μs)||20||40|
|PC Interface||USB 3.1|
|Dimensions (mm)||37 x 40 x 55|
1 Depending on the type of calculation, frame rate may vary.
2 Requires the Trigger option.
|Additional ND filters||The default BeamPro configuration includes one ND filter. Additional ones with different specifications can be ordered|
|High dynamic range||Software mode to increase the dynamic of the BeamPro signal acquisition from 12 to 16 bits. Not compatible with pure single-shot measurement as 2 images are necessary to build one beam profile image|
|Trigger||Synchronization of the BeamPro detection to an external signal for accurate laser single pulse measurement|
Like every Femto Easy product, the BeamPro comes with a powerfull and very user friendly software, especially designed for touch screens, in order to give you the best user experience.